CONCRETE
ETCH &
CLEANER
CONCENTRATE

CLEANS, ETCHES AND BLEACHES
CONCRETE IN ONE EASY STEP
PROVIDES IDEAL
SURFACE PREPARATION
BEFORE SEALING OR PAINTING

This concrete cleaner and etcher is
specially formulated for use on concrete
floors, brick, masonry block and
flagstone. It contains powerful muriatic
acid to clean, etch and whiten concrete
and neutralize surface alkalinity. It
should be used to prepare all concrete
surfaces before painting or sealing, to
provide maximum penetration , bonding
strength and durability of the coating.
DIRECTIONS:
Sweep floor to remove loose soil. For
heavily soiled floors, scrub with a strong
detergent to remove heavy soil, grease
and oil deposits and rinse. Etch the
surface by using a solution of 1 gallon
of this product in 5 gallons of water.
Swab solution onto the surface, and
scrub with an old broom or brush.
Allow to work for 10 minutes or until
bubbling and fizzing stops. Rinse the
surface thoroughly with clean water and
allow to dry completely before sealing
or painting.
Rinse empty containers before disposal.
Use plastic containers to mix solutions –
do not store in metal pails, drums or
sprayers.