RUST CONVERTER

C ONVERTS RUST TO FORM A
STABLE PAINTABLE SURFACE
E LIMINATES THE NEED FOR
SCRAPING, SANDBLASTING OR
PRIMING RUSTY SURFACES
P ROTECTS FURTHER RUSTING
ON SURFACES EXPOSED TO
RAIN, SUN AND SALT SPRAY

DESCRIPTION
When applied to any rusty surface, it will convert the residual rust
to a black protective polymeric coating. This inert protective
coating prevents further rusting and corrosion.
DIRECTIONS
For best results prepare surface by brushing the loose rust from
the surface using a wire brush or sand paper. Clean the surface to
remove grease and grime. Shake well before use.
Hold can 8-12 inches from surface and spray a thin coat onto the
surface.After the surface has dried, it will turn black.Then apply a
second thin coat. Allow 48 hours to completely cure before
painting while protecting it from rain or dew.
For long lasting protection, seal with two coats of a high quality
oil-based paint.
Do not apply if the surface temperature is below 50ºF or above
90ºF. Store in a cool dry place, protected from freezing or
temperatures above 100ºF.